HL-T laser tube cutting machine
Built for tube and profile work that used to need a saw, a drill and a marking table.
Three-chuck tube lasers for round, square, rectangular tube and open profiles, with bundle loading.
- 3 chucksshort-tail cutting
- Bundle loadingoption
- Bevel headoption
The HL-T is a dedicated tube and profile laser cutter with a three-chuck layout that reduces the uncut tail and supports long, heavy tubes. It cuts round, square and rectangular tube plus angle, channel and H-section, with optional bevel cutting and automatic bundle loading.
Highlights
Less material waste
Three chucks hand the tube over so less of each bar is left uncut.
One process instead of three
Cutting, holes, slots and bevels in one setup.
Long, heavy profiles
Supports for long bars and structural sections.
Round, square, rectangular tube; angle, channel, H-beam
Tube nesting and 3D import (STEP/IGES)
Remaining tail length
Fiber laser pipe cutting machine and heavy tube laser cutter for long, heavy sections
H-beam laser cutting: coping, bolt holes and weld bevels in one setup
Cutting Capability
Detailed figures are available on request — ask an application engineer.
Detailed values on request.
Automation
Automatic bundle loader
Loads tubes from a bundle without an operator.
Unloading rack
Collects and sorts finished parts.
Bevel cutting head
For weld preparation on tubes and profiles.
Weld-seam detection
Orients welded tube before cutting.
Technical data
Machine specifications
Detailed figures are available on request — ask an application engineer.
Specifications on request for your configuration.
Key components
We publish component brands so you can compare quotations like for like.
Detailed figures are available on request — ask an application engineer.
More information about the HL-T
Service for the life of the machine
Every HL-T ships with remote diagnostics, a starter spare-parts kit, on-site installation and training. Choose the service plan that matches your shifts.
| Plan | For |
|---|---|
| Essential | Single-shift shops; standard warranty and remote support |
| Advanced | Two shifts; adds scheduled maintenance and priority response |
| Premium | Production-critical machines; fastest response and on-site parts stock |
Plan contents and response times:
Frequently asked questions
What does short-tail cutting mean on a tube laser?
It means the machine can cut almost the full length of the tube, leaving little waste at the end held by the chuck. Three-chuck designs achieve this by handing the tube from chuck to chuck. Actual remaining length depends on the profile.
Can the HL-T cut structural steel profiles?
Yes, with the correct chuck jaws and supports it cuts angle, channel and H-beam. See our steel structure application page.
Get a quote or schedule a test cut
Four fields are enough for the HL-T. Add materials, thickness and timeframe if you can — it helps us send a configuration and budget price in the first reply.
Prefer to see your own part cut first? Schedule a test cut